Calypso CNC User Forums

Thank you for helping me out with my misunderstanding. I am coming from Tormach software in which I just changed the tool number and it did the rest for me. I think that having a better understanding of the G-code will only help me and I really appreciate the quick answer . Seeing how you have a goo...

Hi I am running version 2.0.5. I have a problem that is giving me trouble. Was working and now it is not. When I change tools I use the MDI. Example would be this. I running a tool with a length of 4. It is tool number 1. I want to use tool number 2 which has a length of 5. I call out my tool change...

Great answer and thank you for the good explanation . I tested the measurent of a diameter and it was only .0002 off. I did a test of my the edge of my vise for squareness over 5" and it said i was .0011 out. So I put the old interapid indicator in there and sure enough i was out .001". A ...

Ok I set the calibration per the manual. I still get the error. I don't get it if I set my second slow probe routine above 10. Right now I'm setting at 20 for my fast pass and 10 for my slow. What to you recommend for these settings? Thanks again. The errors were bothering me enough to take my probe...

only thing I can seem to get me closer is reducing diameter of tip about .005" in the tool table. Tip is a ruby tip from tormach with there passive probe. Documentation plus measurement both put tip at .118". Im getting random probing errors also where it claims it cant find x or y plane.???

Yes on 1 and no on 2. I will look it over quick. Thanks

What is the process of proving everything is dialed on the probe and software. I centered my probe using tormach software and it says it is perfect. I cant seem to get a edge zero from my probe that matches my edge finder. When I use your software to find a center in a bore the diameter it reports i...