Tue - 00:10:17 ---Program Startup
Fri - 10:39:02 ---MachStdMill Initialized
Fri - 10:39:34 ---End
Fri - 10:40:11 ---End
Fri - 10:40:37 ---Finding Maintenance Script...
Fri - 10:40:53 ---Running maintenance script...
Fri - 10:40:53 ---Maintenance script finished
Fri - 10:41:08 ---Maintenance script finished
Fri - 10:41:14 ---Metric Mode
Fri - 10:41:14 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:14 ---Press CycleStart after Tool Change
Fri - 10:41:14 ---Press CycleStart after Tool Change
Fri - 10:41:15 ---entered MSMM6End
Fri - 10:41:16 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:16 ---start of M6EndBody
Fri - 10:41:16 ---Tool Change Complete.
Fri - 10:41:16 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:16 ---DLP: entered DisplayLastPage...
Fri - 10:41:16 ---DLP: SS name = 
Fri - 10:41:16 ---DLP: Unknown screen set, resetting to MachStdMill Run Page
Fri - 10:41:16 ---DLP: exiting DisplayLastPage...
Fri - 10:41:16 ---End of M6EndBody
Fri - 10:41:17 ---exiting MSMM6End
Fri - 10:41:17 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:17 ---Press CycleStart after Tool Change
Fri - 10:41:17 ---Press CycleStart after Tool Change
Fri - 10:41:18 ---entered MSMM6End
Fri - 10:41:18 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:18 ---start of M6EndBody
Fri - 10:41:18 ---Tool Change Complete.
Fri - 10:41:18 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:19 ---DLP: entered DisplayLastPage...
Fri - 10:41:19 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:19 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:19 ---DLP: exiting DisplayLastPage...
Fri - 10:41:19 ---End of M6EndBody
Fri - 10:41:19 ---exiting MSMM6End
Fri - 10:41:19 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:19 ---Press CycleStart after Tool Change
Fri - 10:41:20 ---CT DRO 824 = 1
CT Func Call = 1
NT = 2
Fri - 10:41:20 ---End of M6StartSW
Fri - 10:41:20 ---Press CycleStart after Tool Change
Fri - 10:41:20 ---entered MSMM6End
Fri - 10:41:21 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:21 ---start of M6EndBody
Fri - 10:41:21 ---Tool Change Complete.
Fri - 10:41:21 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:21 ---DLP: entered DisplayLastPage...
Fri - 10:41:21 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:21 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:21 ---DLP: exiting DisplayLastPage...
Fri - 10:41:21 ---End of M6EndBody
Fri - 10:41:22 ---exiting MSMM6End
Fri - 10:41:22 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:22 ---Press CycleStart after Tool Change
Fri - 10:41:22 ---End of M6StartSW
Fri - 10:41:22 ---Press CycleStart after Tool Change
Fri - 10:41:23 ---entered MSMM6End
Fri - 10:41:23 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:24 ---start of M6EndBody
Fri - 10:41:24 ---Tool Change Complete.
Fri - 10:41:24 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:24 ---DLP: entered DisplayLastPage...
Fri - 10:41:24 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:24 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:24 ---DLP: exiting DisplayLastPage...
Fri - 10:41:24 ---End of M6EndBody
Fri - 10:41:24 ---exiting MSMM6End
Fri - 10:41:25 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:25 ---Press CycleStart after Tool Change
Fri - 10:41:25 ---End of M6StartSW
Fri - 10:41:25 ---Press CycleStart after Tool Change
Fri - 10:41:26 ---entered MSMM6End
Fri - 10:41:26 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:26 ---start of M6EndBody
Fri - 10:41:26 ---Tool Change Complete.
Fri - 10:41:26 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:27 ---DLP: entered DisplayLastPage...
Fri - 10:41:27 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:27 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:27 ---DLP: exiting DisplayLastPage...
Fri - 10:41:27 ---End of M6EndBody
Fri - 10:41:27 ---exiting MSMM6End
Fri - 10:41:27 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:27 ---Press CycleStart after Tool Change
Fri - 10:41:28 ---CT DRO 824 = 3
CT Func Call = 3
NT = 3
Fri - 10:41:28 ---Press CycleStart after Tool Change
Fri - 10:41:29 ---entered MSMM6End
Fri - 10:41:29 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:29 ---start of M6EndBody
Fri - 10:41:29 ---Tool Change Complete.
Fri - 10:41:29 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:29 ---DLP: entered DisplayLastPage...
Fri - 10:41:30 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:30 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:30 ---DLP: exiting DisplayLastPage...
Fri - 10:41:30 ---End of M6EndBody
Fri - 10:41:30 ---exiting MSMM6End
Fri - 10:41:30 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:30 ---Press CycleStart after Tool Change
Fri - 10:41:31 ---CT DRO 824 = 3
CT Func Call = 3
NT = 4
Fri - 10:41:31 ---Press CycleStart after Tool Change
Fri - 10:41:32 ---entered MSMM6End
Fri - 10:41:32 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:32 ---start of M6EndBody
Fri - 10:41:32 ---Tool Change Complete.
Fri - 10:41:32 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:32 ---DLP: entered DisplayLastPage...
Fri - 10:41:32 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:32 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:32 ---DLP: exiting DisplayLastPage...
Fri - 10:41:33 ---End of M6EndBody
Fri - 10:41:33 ---exiting MSMM6End
Fri - 10:41:33 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:33 ---Press CycleStart after Tool Change
Fri - 10:41:33 ---CT DRO 824 = 4
CT Func Call = 4
NT = 4
Fri - 10:41:33 ---Press CycleStart after Tool Change
Fri - 10:41:34 ---entered MSMM6End
Fri - 10:41:34 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:34 ---start of M6EndBody
Fri - 10:41:34 ---Tool Change Complete.
Fri - 10:41:34 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:34 ---DLP: entered DisplayLastPage...
Fri - 10:41:35 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:35 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:35 ---DLP: exiting DisplayLastPage...
Fri - 10:41:35 ---End of M6EndBody
Fri - 10:41:35 ---exiting MSMM6End
Fri - 10:41:35 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:35 ---Press CycleStart after Tool Change
Fri - 10:41:36 ---CT DRO 824 = 4
CT Func Call = 4
NT = 5
Fri - 10:41:36 ---End of M6StartSW
Fri - 10:41:36 ---back from M6StartMain
Fri - 10:41:36 ---Press CycleStart after Tool Change
Fri - 10:41:37 ---entered MSMM6End
Fri - 10:41:37 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:37 ---start of M6EndBody
Fri - 10:41:37 ---Tool Change Complete.
Fri - 10:41:37 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:37 ---DLP: entered DisplayLastPage...
Fri - 10:41:37 ---DLP: SS name = MACHSTDMILL
Fri - 10:41:37 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:38 ---DLP: exiting DisplayLastPage...
Fri - 10:41:38 ---End of M6EndBody
Fri - 10:41:38 ---exiting MSMM6End
Fri - 10:41:38 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:38 ---Press CycleStart after Tool Change
Fri - 10:41:38 ---CT DRO 824 = 5
CT Func Call = 5
NT = 5
Fri - 10:41:39 ---End of M6StartSW
Fri - 10:41:39 ---Press CycleStart after Tool Change
Fri - 10:41:45 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:45 ---Press CycleStart after Tool Change
Fri - 10:41:45 ---CT DRO 824 = 5
CT Func Call = 5
NT = 250
Fri - 10:41:45 ---End of M6StartSW
Fri - 10:41:45 ---Press CycleStart after Tool Change
Fri - 10:41:46 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:41:46 ---Tool Change Complete.
Fri - 10:41:46 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:41:47 ---DLP: entered DisplayLastPage...
Fri - 10:41:47 ---DLP: MSM screen set; displaying page: 4
Fri - 10:41:47 ---DLP: exiting DisplayLastPage...
Fri - 10:41:47 ---End of M6EndBody
Fri - 10:41:47 ---exiting MSMM6End
Fri - 10:41:58 ---Tool Change...Press CycleStart to continue. 
Fri - 10:41:59 ---Press CycleStart after Tool Change
Fri - 10:41:59 ---CT DRO 824 = 250
CT Func Call = 250
NT = 1
Fri - 10:41:59 ---End of M6StartSW
Fri - 10:41:59 ---Press CycleStart after Tool Change
Fri - 10:42:00 ---entered MSMM6End
Fri - 10:42:00 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:00 ---start of M6EndBody
Fri - 10:42:00 ---Tool Change Complete.
Fri - 10:42:00 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:00 ---DLP: entered DisplayLastPage...
Fri - 10:42:01 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:01 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:01 ---DLP: exiting DisplayLastPage...
Fri - 10:42:01 ---End of M6EndBody
Fri - 10:42:01 ---exiting MSMM6End
Fri - 10:42:02 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:02 ---Press CycleStart after Tool Change
Fri - 10:42:03 ---CT DRO 824 = 1
CT Func Call = 1
NT = 6
Fri - 10:42:03 ---End of M6StartSW
Fri - 10:42:03 ---Press CycleStart after Tool Change
Fri - 10:42:03 ---entered MSMM6End
Fri - 10:42:04 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:04 ---start of M6EndBody
Fri - 10:42:04 ---Tool Change Complete.
Fri - 10:42:04 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:04 ---DLP: entered DisplayLastPage...
Fri - 10:42:04 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:04 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:04 ---DLP: exiting DisplayLastPage...
Fri - 10:42:04 ---End of M6EndBody
Fri - 10:42:05 ---exiting MSMM6End
Fri - 10:42:05 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:05 ---TCStopAndWait mode
Fri - 10:42:05 ---Press CycleStart after Tool Change
Fri - 10:42:05 ---CT DRO 824 = 6
CT Func Call = 6
NT = 6
Fri - 10:42:05 ---End of M6StartSW
Fri - 10:42:05 ---Press CycleStart after Tool Change
Fri - 10:42:06 ---entered MSMM6End
Fri - 10:42:06 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:06 ---start of M6EndBody
Fri - 10:42:07 ---Tool Change Complete.
Fri - 10:42:07 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:07 ---DLP: entered DisplayLastPage...
Fri - 10:42:07 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:07 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:07 ---DLP: exiting DisplayLastPage...
Fri - 10:42:07 ---End of M6EndBody
Fri - 10:42:07 ---exiting MSMM6End
Fri - 10:42:07 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:08 ---Press CycleStart after Tool Change
Fri - 10:42:08 ---CT DRO 824 = 6
CT Func Call = 6
NT = 7
Fri - 10:42:08 ---End of M6StartSW
Fri - 10:42:08 ---Press CycleStart after Tool Change
Fri - 10:42:09 ---entered MSMM6End
Fri - 10:42:09 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:09 ---start of M6EndBody
Fri - 10:42:09 ---Tool Change Complete.
Fri - 10:42:09 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:09 ---DLP: entered DisplayLastPage...
Fri - 10:42:09 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:10 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:10 ---DLP: exiting DisplayLastPage...
Fri - 10:42:10 ---End of M6EndBody
Fri - 10:42:10 ---exiting MSMM6End
Fri - 10:42:10 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:10 ---Press CycleStart after Tool Change
Fri - 10:42:11 ---CT DRO 824 = 7
CT Func Call = 7
NT = 7
Fri - 10:42:11 ---End of M6StartSW
Fri - 10:42:11 ---Press CycleStart after Tool Change
Fri - 10:42:11 ---entered MSMM6End
Fri - 10:42:12 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:12 ---Tool Change Complete.
Fri - 10:42:12 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:12 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:12 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:12 ---DLP: exiting DisplayLastPage...
Fri - 10:42:12 ---End of M6EndBody
Fri - 10:42:13 ---exiting MSMM6End
Fri - 10:42:13 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:13 ---Press CycleStart after Tool Change
Fri - 10:42:13 ---CT DRO 824 = 7
CT Func Call = 7
NT = 8
Fri - 10:42:13 ---Press CycleStart after Tool Change
Fri - 10:42:14 ---entered MSMM6End
Fri - 10:42:14 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:14 ---start of M6EndBody
Fri - 10:42:14 ---Tool Change Complete.
Fri - 10:42:15 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:15 ---DLP: entered DisplayLastPage...
Fri - 10:42:15 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:15 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:15 ---DLP: exiting DisplayLastPage...
Fri - 10:42:15 ---End of M6EndBody
Fri - 10:42:15 ---exiting MSMM6End
Fri - 10:42:15 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:15 ---Press CycleStart after Tool Change
Fri - 10:42:16 ---Press CycleStart after Tool Change
Fri - 10:42:16 ---End of M6StartSW
Fri - 10:42:16 ---Press CycleStart after Tool Change
Fri - 10:42:17 ---entered MSMM6End
Fri - 10:42:17 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:17 ---start of M6EndBody
Fri - 10:42:17 ---Tool Change Complete.
Fri - 10:42:17 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:17 ---DLP: entered DisplayLastPage...
Fri - 10:42:17 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:18 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:18 ---DLP: exiting DisplayLastPage...
Fri - 10:42:18 ---End of M6EndBody
Fri - 10:42:18 ---exiting MSMM6End
Fri - 10:42:18 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:18 ---Press CycleStart after Tool Change
Fri - 10:42:19 ---CT DRO 824 = 8
CT Func Call = 8
NT = 9
Fri - 10:42:19 ---End of M6StartSW
Fri - 10:42:19 ---Press CycleStart after Tool Change
Fri - 10:42:20 ---entered MSMM6End
Fri - 10:42:20 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:20 ---start of M6EndBody
Fri - 10:42:20 ---Tool Change Complete.
Fri - 10:42:20 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:20 ---DLP: entered DisplayLastPage...
Fri - 10:42:20 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:20 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:20 ---DLP: exiting DisplayLastPage...
Fri - 10:42:21 ---End of M6EndBody
Fri - 10:42:21 ---exiting MSMM6End
Fri - 10:42:21 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:21 ---Press CycleStart after Tool Change
Fri - 10:42:21 ---CT DRO 824 = 9
CT Func Call = 9
NT = 9
Fri - 10:42:21 ---End of M6StartSW
Fri - 10:42:22 ---Press CycleStart after Tool Change
Fri - 10:42:22 ---entered MSMM6End
Fri - 10:42:22 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:22 ---start of M6EndBody
Fri - 10:42:23 ---Tool Change Complete.
Fri - 10:42:23 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:23 ---DLP: entered DisplayLastPage...
Fri - 10:42:23 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:23 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:23 ---DLP: exiting DisplayLastPage...
Fri - 10:42:23 ---End of M6EndBody
Fri - 10:42:23 ---exiting MSMM6End
Fri - 10:42:23 ---End
Fri - 10:42:30 ---End
Fri - 10:42:34 ---Metric Mode
Fri - 10:42:34 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:34 ---Press CycleStart after Tool Change
Fri - 10:42:34 ---CT DRO 824 = 9
CT Func Call = 9
NT = 1
Fri - 10:42:34 ---End of M6StartSW
Fri - 10:42:34 ---Press CycleStart after Tool Change
Fri - 10:42:35 ---entered MSMM6End
Fri - 10:42:35 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:35 ---start of M6EndBody
Fri - 10:42:36 ---Tool Change Complete.
Fri - 10:42:36 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:36 ---DLP: entered DisplayLastPage...
Fri - 10:42:36 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:36 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:36 ---DLP: exiting DisplayLastPage...
Fri - 10:42:36 ---End of M6EndBody
Fri - 10:42:36 ---exiting MSMM6End
Fri - 10:42:36 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:37 ---Press CycleStart after Tool Change
Fri - 10:42:37 ---CT DRO 824 = 1
CT Func Call = 1
NT = 2
Fri - 10:42:37 ---End of M6StartSW
Fri - 10:42:37 ---back from M6StartMain
Fri - 10:42:37 ---Press CycleStart after Tool Change
Fri - 10:42:38 ---entered MSMM6End
Fri - 10:42:38 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:38 ---start of M6EndBody
Fri - 10:42:38 ---Tool Change Complete.
Fri - 10:42:38 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:38 ---DLP: entered DisplayLastPage...
Fri - 10:42:38 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:39 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:39 ---DLP: exiting DisplayLastPage...
Fri - 10:42:39 ---End of M6EndBody
Fri - 10:42:39 ---exiting MSMM6End
Fri - 10:42:39 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:39 ---Press CycleStart after Tool Change
Fri - 10:42:40 ---CT DRO 824 = 2
CT Func Call = 2
NT = 3
Fri - 10:42:40 ---End of M6StartSW
Fri - 10:42:40 ---Press CycleStart after Tool Change
Fri - 10:42:40 ---entered MSMM6End
Fri - 10:42:40 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:40 ---start of M6EndBody
Fri - 10:42:41 ---Tool Change Complete.
Fri - 10:42:41 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:41 ---DLP: entered DisplayLastPage...
Fri - 10:42:41 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:41 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:41 ---DLP: exiting DisplayLastPage...
Fri - 10:42:41 ---End of M6EndBody
Fri - 10:42:41 ---exiting MSMM6End
Fri - 10:42:41 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:42 ---Press CycleStart after Tool Change
Fri - 10:42:42 ---CT DRO 824 = 3
CT Func Call = 3
NT = 4
Fri - 10:42:42 ---End of M6StartSW
Fri - 10:42:42 ---Press CycleStart after Tool Change
Fri - 10:42:42 ---entered MSMM6End
Fri - 10:42:42 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:43 ---start of M6EndBody
Fri - 10:42:43 ---Tool Change Complete.
Fri - 10:42:43 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:43 ---DLP: entered DisplayLastPage...
Fri - 10:42:43 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:43 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:43 ---DLP: exiting DisplayLastPage...
Fri - 10:42:43 ---End of M6EndBody
Fri - 10:42:43 ---exiting MSMM6End
Fri - 10:42:44 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:44 ---Press CycleStart after Tool Change
Fri - 10:42:44 ---CT DRO 824 = 4
CT Func Call = 4
NT = 5
Fri - 10:42:44 ---End of M6StartSW
Fri - 10:42:44 ---Press CycleStart after Tool Change
Fri - 10:42:45 ---entered MSMM6End
Fri - 10:42:45 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:45 ---start of M6EndBody
Fri - 10:42:45 ---Tool Change Complete.
Fri - 10:42:45 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:45 ---DLP: entered DisplayLastPage...
Fri - 10:42:45 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:45 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:45 ---DLP: exiting DisplayLastPage...
Fri - 10:42:46 ---End of M6EndBody
Fri - 10:42:46 ---exiting MSMM6End
Fri - 10:42:46 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:46 ---Press CycleStart after Tool Change
Fri - 10:42:46 ---CT DRO 824 = 5
CT Func Call = 5
NT = 6
Fri - 10:42:46 ---End of M6StartSW
Fri - 10:42:47 ---Press CycleStart after Tool Change
Fri - 10:42:47 ---entered MSMM6End
Fri - 10:42:47 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:47 ---start of M6EndBody
Fri - 10:42:47 ---Tool Change Complete.
Fri - 10:42:47 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:47 ---DLP: entered DisplayLastPage...
Fri - 10:42:47 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:47 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:48 ---DLP: exiting DisplayLastPage...
Fri - 10:42:48 ---End of M6EndBody
Fri - 10:42:48 ---exiting MSMM6End
Fri - 10:42:48 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:48 ---Press CycleStart after Tool Change
Fri - 10:42:48 ---CT DRO 824 = 6
CT Func Call = 6
NT = 7
Fri - 10:42:49 ---End of M6StartSW
Fri - 10:42:49 ---Press CycleStart after Tool Change
Fri - 10:42:49 ---entered MSMM6End
Fri - 10:42:49 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:49 ---start of M6EndBody
Fri - 10:42:49 ---Tool Change Complete.
Fri - 10:42:49 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:49 ---DLP: entered DisplayLastPage...
Fri - 10:42:49 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:50 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:50 ---DLP: exiting DisplayLastPage...
Fri - 10:42:50 ---End of M6EndBody
Fri - 10:42:50 ---exiting MSMM6End
Fri - 10:42:50 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:50 ---Press CycleStart after Tool Change
Fri - 10:42:51 ---CT DRO 824 = 7
CT Func Call = 7
NT = 8
Fri - 10:42:51 ---End of M6StartSW
Fri - 10:42:51 ---Press CycleStart after Tool Change
Fri - 10:42:51 ---entered MSMM6End
Fri - 10:42:51 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:51 ---start of M6EndBody
Fri - 10:42:51 ---Tool Change Complete.
Fri - 10:42:51 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:51 ---DLP: entered DisplayLastPage...
Fri - 10:42:52 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:52 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:52 ---DLP: exiting DisplayLastPage...
Fri - 10:42:52 ---End of M6EndBody
Fri - 10:42:52 ---exiting MSMM6End
Fri - 10:42:52 ---Tool Change...Press CycleStart to continue. 
Fri - 10:42:52 ---Press CycleStart after Tool Change
Fri - 10:42:53 ---CT DRO 824 = 8
CT Func Call = 8
NT = 9
Fri - 10:42:53 ---End of M6StartSW
Fri - 10:42:53 ---Press CycleStart after Tool Change
Fri - 10:42:53 ---entered MSMM6End
Fri - 10:42:53 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:42:53 ---start of M6EndBody
Fri - 10:42:53 ---Tool Change Complete.
Fri - 10:42:54 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:42:54 ---DLP: entered DisplayLastPage...
Fri - 10:42:54 ---DLP: SS name = MACHSTDMILL
Fri - 10:42:54 ---DLP: MSM screen set; displaying page: 4
Fri - 10:42:54 ---DLP: exiting DisplayLastPage...
Fri - 10:42:54 ---End of M6EndBody
Fri - 10:42:54 ---exiting MSMM6End
Fri - 10:42:54 ---End
Fri - 10:43:05 ---End
Fri - 10:43:09 ---Metric Mode
Fri - 10:43:09 ---Absolute Coordinates
Fri - 10:43:12 ---Tool Change...Press CycleStart to continue. 
Fri - 10:43:13 ---Press CycleStart after Tool Change
Fri - 10:43:14 ---CT DRO 824 = 9
CT Func Call = 9
NT = 1
Fri - 10:43:14 ---Press CycleStart after Tool Change
Fri - 10:43:14 ---entered MSMM6End
Fri - 10:43:15 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:43:15 ---start of M6EndBody
Fri - 10:43:15 ---Tool Change Complete.
Fri - 10:43:15 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:43:15 ---DLP: entered DisplayLastPage...
Fri - 10:43:15 ---DLP: SS name = MACHSTDMILL
Fri - 10:43:15 ---DLP: MSM screen set; displaying page: 4
Fri - 10:43:15 ---DLP: exiting DisplayLastPage...
Fri - 10:43:15 ---End of M6EndBody
Fri - 10:43:16 ---exiting MSMM6End
Fri - 10:43:16 ---Tool Change...Press CycleStart to continue. 
Fri - 10:43:19 ---Press CycleStart after Tool Change
Fri - 10:43:20 ---Press CycleStart after Tool Change
Fri - 10:43:20 ---End of M6StartSW
Fri - 10:43:20 ---Press CycleStart after Tool Change
Fri - 10:43:24 ---entered MSMM6End
Fri - 10:43:24 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:43:24 ---start of M6EndBody
Fri - 10:43:24 ---Tool Change Complete.
Fri - 10:43:24 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:43:24 ---DLP: entered DisplayLastPage...
Fri - 10:43:24 ---DLP: SS name = MACHSTDMILL
Fri - 10:43:25 ---DLP: MSM screen set; displaying page: 4
Fri - 10:43:25 ---DLP: exiting DisplayLastPage...
Fri - 10:43:25 ---End of M6EndBody
Fri - 10:43:25 ---exiting MSMM6End
Fri - 10:43:31 ---Tool Change...Press CycleStart to continue. 
Fri - 10:43:34 ---Press CycleStart after Tool Change
Fri - 10:43:35 ---CT DRO 824 = 1
CT Func Call = 1
NT = 2
Fri - 10:43:35 ---End of M6StartSW
Fri - 10:43:35 ---Press CycleStart after Tool Change
Fri - 10:43:36 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:43:36 ---Tool Change Complete.
Fri - 10:43:36 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:43:36 ---DLP: entered DisplayLastPage...
Fri - 10:43:37 ---DLP: MSM screen set; displaying page: 4
Fri - 10:43:37 ---DLP: exiting DisplayLastPage...
Fri - 10:43:37 ---End of M6EndBody
Fri - 10:43:37 ---exiting MSMM6End
Fri - 10:43:37 ---Tool Change...Press CycleStart to continue. 
Fri - 10:43:39 ---Press CycleStart after Tool Change
Fri - 10:43:39 ---CT DRO 824 = 2
CT Func Call = 2
NT = 2
Fri - 10:43:39 ---End of M6StartSW
Fri - 10:43:39 ---Press CycleStart after Tool Change
Fri - 10:43:40 ---entered MSMM6End
Fri - 10:43:40 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:43:40 ---start of M6EndBody
Fri - 10:43:40 ---Tool Change Complete.
Fri - 10:43:40 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:43:40 ---DLP: entered DisplayLastPage...
Fri - 10:43:41 ---DLP: SS name = MACHSTDMILL
Fri - 10:43:41 ---DLP: MSM screen set; displaying page: 4
Fri - 10:43:41 ---DLP: exiting DisplayLastPage...
Fri - 10:43:41 ---End of M6EndBody
Fri - 10:43:41 ---exiting MSMM6End
Fri - 10:43:53 ---Tool Change...Press CycleStart to continue. 
Fri - 10:43:56 ---Press CycleStart after Tool Change
Fri - 10:43:56 ---CT DRO 824 = 2
CT Func Call = 2
NT = 3
Fri - 10:43:56 ---End of M6StartSW
Fri - 10:43:56 ---Press CycleStart after Tool Change
Fri - 10:45:27 ---entered MSMM6End
Fri - 10:45:27 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:45:27 ---start of M6EndBody
Fri - 10:45:27 ---Tool Change Complete.
Fri - 10:45:27 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:45:27 ---DLP: entered DisplayLastPage...
Fri - 10:45:27 ---DLP: SS name = MACHSTDMILL
Fri - 10:45:27 ---DLP: MSM screen set; displaying page: 4
Fri - 10:45:28 ---DLP: exiting DisplayLastPage...
Fri - 10:45:28 ---End of M6EndBody
Fri - 10:45:28 ---exiting MSMM6End
Fri - 10:45:28 ---Tool Change...Press CycleStart to continue. 
Fri - 10:45:30 ---Press CycleStart after Tool Change
Fri - 10:45:30 ---CT DRO 824 = 3
CT Func Call = 3
NT = 3
Fri - 10:45:30 ---End of M6StartSW
Fri - 10:45:30 ---Press CycleStart after Tool Change
Fri - 10:45:31 ---entered MSMM6End
Fri - 10:45:31 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:45:31 ---start of M6EndBody
Fri - 10:45:31 ---Tool Change Complete.
Fri - 10:45:31 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:45:31 ---DLP: entered DisplayLastPage...
Fri - 10:45:31 ---DLP: SS name = MACHSTDMILL
Fri - 10:45:31 ---DLP: MSM screen set; displaying page: 4
Fri - 10:45:32 ---DLP: exiting DisplayLastPage...
Fri - 10:45:32 ---End of M6EndBody
Fri - 10:45:32 ---exiting MSMM6End
Fri - 10:45:43 ---Tool Change...Press CycleStart to continue. 
Fri - 10:45:47 ---Press CycleStart after Tool Change
Fri - 10:45:48 ---End of M6StartSW
Fri - 10:45:48 ---Press CycleStart after Tool Change
Fri - 10:45:49 ---entered MSMM6End
Fri - 10:45:49 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:45:50 ---start of M6EndBody
Fri - 10:45:50 ---Tool Change Complete.
Fri - 10:45:50 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:45:50 ---DLP: entered DisplayLastPage...
Fri - 10:45:50 ---DLP: SS name = MACHSTDMILL
Fri - 10:45:50 ---DLP: MSM screen set; displaying page: 4
Fri - 10:45:50 ---DLP: exiting DisplayLastPage...
Fri - 10:45:50 ---End of M6EndBody
Fri - 10:45:50 ---exiting MSMM6End
Fri - 10:45:51 ---Tool Change...Press CycleStart to continue. 
Fri - 10:45:52 ---Press CycleStart after Tool Change
Fri - 10:45:53 ---CT DRO 824 = 4
CT Func Call = 4
NT = 4
Fri - 10:45:53 ---End of M6StartSW
Fri - 10:45:53 ---Press CycleStart after Tool Change
Fri - 10:45:53 ---entered MSMM6End
Fri - 10:45:54 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:45:54 ---Tool Change Complete.
Fri - 10:45:54 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:45:54 ---DLP: entered DisplayLastPage...
Fri - 10:45:54 ---DLP: SS name = MACHSTDMILL
Fri - 10:45:54 ---DLP: MSM screen set; displaying page: 4
Fri - 10:45:54 ---DLP: exiting DisplayLastPage...
Fri - 10:45:54 ---End of M6EndBody
Fri - 10:45:54 ---exiting MSMM6End
Fri - 10:46:37 ---Tool Change...Press CycleStart to continue. 
Fri - 10:46:39 ---Press CycleStart after Tool Change
Fri - 10:46:39 ---CT DRO 824 = 4
CT Func Call = 4
NT = 5
Fri - 10:46:39 ---End of M6StartSW
Fri - 10:46:40 ---Press CycleStart after Tool Change
Fri - 10:52:45 ---entered MSMM6End
Fri - 10:52:45 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:52:46 ---start of M6EndBody
Fri - 10:52:46 ---Tool Change Complete.
Fri - 10:52:46 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:52:46 ---DLP: entered DisplayLastPage...
Fri - 10:52:46 ---DLP: SS name = MACHSTDMILL
Fri - 10:52:46 ---DLP: MSM screen set; displaying page: 4
Fri - 10:52:46 ---DLP: exiting DisplayLastPage...
Fri - 10:52:46 ---End of M6EndBody
Fri - 10:52:46 ---exiting MSMM6End
Fri - 10:52:47 ---Tool Change...Press CycleStart to continue. 
Fri - 10:52:48 ---Press CycleStart after Tool Change
Fri - 10:52:49 ---CT DRO 824 = 5
CT Func Call = 5
NT = 5
Fri - 10:52:49 ---End of M6StartSW
Fri - 10:52:49 ---Press CycleStart after Tool Change
Fri - 10:52:50 ---entered MSMM6End
Fri - 10:52:50 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:52:50 ---start of M6EndBody
Fri - 10:52:50 ---Tool Change Complete.
Fri - 10:52:50 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:52:50 ---DLP: entered DisplayLastPage...
Fri - 10:52:50 ---DLP: SS name = MACHSTDMILL
Fri - 10:52:50 ---DLP: MSM screen set; displaying page: 4
Fri - 10:52:50 ---DLP: exiting DisplayLastPage...
Fri - 10:52:50 ---End of M6EndBody
Fri - 10:52:51 ---exiting MSMM6End
Fri - 10:53:01 ---Tool Change...Press CycleStart to continue. 
Fri - 10:53:05 ---Press CycleStart after Tool Change
Fri - 10:53:06 ---CT DRO 824 = 5
CT Func Call = 5
NT = 6
Fri - 10:53:06 ---End of M6StartSW
Fri - 10:53:06 ---Press CycleStart after Tool Change
Fri - 10:53:08 ---Tool Change...Press CycleStart to continue. 
Fri - 10:53:08 ---TCStopAndWait mode
Fri - 10:53:08 ---Press CycleStart after Tool Change
Fri - 10:53:08 ---CT DRO 824 = 6
CT Func Call = 6
NT = 250
Fri - 10:53:08 ---End of M6StartSW
Fri - 10:53:09 ---Press CycleStart after Tool Change
Fri - 10:53:09 ---entered MSMM6End
Fri - 10:53:09 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:53:09 ---start of M6EndBody
Fri - 10:53:10 ---Tool Change Complete.
Fri - 10:53:10 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:53:10 ---DLP: entered DisplayLastPage...
Fri - 10:53:10 ---DLP: SS name = MACHSTDMILL
Fri - 10:53:10 ---DLP: MSM screen set; displaying page: 4
Fri - 10:53:10 ---DLP: exiting DisplayLastPage...
Fri - 10:53:10 ---End of M6EndBody
Fri - 10:53:10 ---exiting MSMM6End
Fri - 10:53:11 ---exiting MSMM6End
Fri - 10:53:20 ---Tool Change...Press CycleStart to continue. 
Fri - 10:53:20 ---Press CycleStart after Tool Change
Fri - 10:53:20 ---CT DRO 824 = 250
CT Func Call = 250
NT = 1
Fri - 10:53:20 ---End of M6StartSW
Fri - 10:53:21 ---Press CycleStart after Tool Change
Fri - 10:53:21 ---entered MSMM6End
Fri - 10:53:21 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:53:22 ---start of M6EndBody
Fri - 10:53:22 ---Tool Change Complete.
Fri - 10:53:22 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:53:22 ---DLP: entered DisplayLastPage...
Fri - 10:53:22 ---DLP: SS name = MACHSTDMILL
Fri - 10:53:22 ---DLP: MSM screen set; displaying page: 21
Fri - 10:53:22 ---DLP: exiting DisplayLastPage...
Fri - 10:53:22 ---End of M6EndBody
Fri - 10:53:22 ---exiting MSMM6End
Fri - 10:53:25 ---Tool Change...Press CycleStart to continue. 
Fri - 10:53:26 ---Press CycleStart after Tool Change
Fri - 10:53:27 ---CT DRO 824 = 1
CT Func Call = 1
NT = 1
Fri - 10:53:27 ---End of M6StartSW
Fri - 10:53:27 ---Press CycleStart after Tool Change
Fri - 10:53:28 ---entered MSMM6End
Fri - 10:53:28 ---M6EndBody script path spec = ScreenSetMacros\MachStdMill.set\Masters\Scripts\Common\MSMM6EndBody
Fri - 10:53:28 ---start of M6EndBody
Fri - 10:53:28 ---Tool Change Complete.
Fri - 10:53:28 ---MSMM6EndBody MSMTCPageChangeEnabledLED ON
Fri - 10:53:29 ---DLP: entered DisplayLastPage...
Fri - 10:53:29 ---DLP: SS name = MACHSTDMILL
Fri - 10:53:29 ---DLP: MSM screen set; displaying page: 4
Fri - 10:53:29 ---DLP: exiting DisplayLastPage...
Fri - 10:53:29 ---End of M6EndBody
Fri - 10:53:29 ---exiting MSMM6End
Fri - 10:53:47 ---Tool Change...Press CycleStart to continue. 
Fri - 10:53:50 ---Press CycleStart after Tool Change
Fri - 10:53:50 ---Press CycleStart after Tool Change
Fri - 10:53:50 ---EStop Button Pressed.
Fri - 10:53:50 ---External EStop Requested.
Fri - 10:54:00 ---back from M6StartMain